A freestanding zirconium filter

A 100 nm freestanding zirconium film calculated from 1 to 40 nm: transmission, reflection and absorption at 13.5 nm, with the model assumptions stated.

EUV Insight · Calculated example · Updated
0%1.025%10.850%20.575%30.3100%40.0Wavelength (nm)
100 nm freestanding zirconium: 70.4% transmission at 13.5 nm. Transmission versus wavelength; the dashed line marks 13.5 nm. Normal incidence, unpolarized, smooth interfaces. Calculated, not measured.
Open this design in the app FreeOpens on the free plan, no account needed.

Why this design

Zirconium passes a band around 13.5 nm and absorbs strongly at longer wavelengths, which is why thin zirconium membranes are used as spectral-purity filters and detector windows in EUV systems.

Design inputs

Inputs for the Zr filter · 13.5 nm example
InputValue
Layer 1 from the incident side100 nm Zr, 6.52 g/cm³
SurroundingsVacuum on both sides, no substrate
Wavelength range1–40 nm, 391 points
IlluminationNormal incidence, unpolarized
InterfacesSmooth (no roughness)

Calculated result

Calculated response at 13.5 nm
QuantityValue (%)
Transmission70.39
Reflection0.05
Absorption29.56

What this model leaves out

This is the optical model only. It has no surface oxide, no support mesh and no heating or mechanical-strength calculation. Add oxide layers explicitly when your film has been exposed to air.

The calculation uses bundled reference optical constants and a planar stack. It does not establish mechanical strength, thermal behavior, lifetime or fabrication feasibility.

Next steps

  1. Open the design in the app and confirm the inputs match the table above.
  2. Change a thickness and read the transmission at the target wavelength.
  3. Add the layers your physical film has, such as oxide, using appropriate optical data.

Calculated with the production solver from the bundled optical reference tables, not measured samples. Example-data fingerprint: 1f022e35fcfc99b7. Assumptions and data sources.